Installation Guide



3. Fishwire forward 1/2" mounting hardware through the frame
access hole as shown.
See fishwire diagram for reference.
5. Raise hitch into position, attaching to the fishwired hardware
on the driver side. 3/8" hardware will push through the rear
of the vehicle frame on the passenger side and attach with a
9/16" socket as shown. Hold tightly on the back side with a
boxed end wrench to secure.
6. Using 1/2" carriage bolt, nut and spacer, attach rear hitch
plate to vehicle tow loop.
4. Reverse fishwire rearward 1/2" mounting hardware into the
frame access hole as shown.
See reverse fishwire diagram for reference.