Installation Guide

I NSTALLATI ON W ALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
DESIGNED FOR USE WITH
BALLMOUNT #D-55001 / 45501
DESIGNED FOR USE WITH
EURO MOUNT #45571 (1 7/8"
BALL) & 45572 (2" BALL)
1. Begin bumper cover removal process by removing (1)
screw, (1) push fastener from behind rear tire, and
(1) push fastener from the wheel well.
2. Remove (1) screw hidden behind the wheel well at the
top of the facia. Remove the plastic clip by prying it out
with a flat head screw driver.
3. Remove small plastic panel between tail light and trunk
opening. Remove exposed screw.
Repeat STEPS 1-3 on the other side of the vehicle.
EXSITING M8
VEHICLE HARDWARE