Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. Insert the 3/8" U-bolt through the tow loop. Raise hitch
into position and loosely secure to the U-bolt using 3/8"
flange nuts.
4. Place the SP22 spacer on top of the driver side plate and
secure hitch to the frame rails using 7/16" flange nuts.
5. Torque all 7/16" hardware to 70 ft-lbs.
Torque all 3/8" hardware to 45 ft-lbs.
Raise and secure exhaust back into position.
NOTE: The hangers on the muffler may need to be bent
slightly for clearance.
INSTALLATION COMPLETE