Installation Guide

INSTALLATION WALKTHROUGH:

For more information log onto www.curtmfg.com

Parts List

DESCRIPTION

PART NUMBER

QTY

ITEM

BOLT,CAR,7/16-14 UNC,1-1/2,GRD8,YZ10-1028221

BOLT,CAR,7/16-14 UNC,1,GRD8,YZ

10-1031122

NUT,SER-FLANGE,7/16-14 UNC,GRD8,YZ20-0010343

.250 x 1.00 x 3.00" SQUARE HOLE SPACERCM-SP62

.250 x .88 x 2.25" SQUARE HOLE SPACERCM-SP224

7/16" FISHWIRE7_16 FISHWIRE46

EXISTING ACCESS SLOT

(BOTH FRAMES)

EXISTING SLOT

(BOTH FRAMES)

PASSENGER SIDE

FRAME RAIL

DRIVER SIDE FRAME RAIL

Lower the exhaust by removing 5 rubber isolators (2 on each

muffler and 1 in the center of the exhaust). Remove the passenger

side muffler by removing the (2) flange nuts attaching it to the

exhaust pipe with a 14mm socket.

Remove the rearward most screw in the heat shields on the frame

rail. Measure 5” forward on the heat shield and make a 1.25” hole

in line with the screw hole (both heat shields). Flattening the heat

shield around the screw that was removed will aid in installing the

forward most flange nuts.

EURO MOUNT

OPTION AVAILABLE

# 45561 (1 7/8" BALL)

# 45562 (2" BALL)

DESIGNED FOR USE WITH

BALL MOUNT # 45520