Installation Guide

Parts List
DESCRIPTIONPART NUMBERQTYITEM
HEX FLANGE NUT7/16-1441
HEX FLANGE NUTHFN381622
U-BOLT
3_8 - 16 x 1.00 x 1.8813
CARRIAGE BOLT7/16-14 x 1 1/444
.250 x .88 x 2.25" SQUARE HOLE SPACERCM-SP245
7/16" FISHWIRE7_16 FISHWIRE46
INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
1. Lower exhaust by removing (4) rubber exhaust isolators
See RUBBER ISOLATOR REMOVAL DIAGRAM below.
2. Remove heat shield by removing (2) bolts per shield.
6
5
4
1
2
3
ACCESS HOLE
(BOTH SIDES)
TRUNK PAN
PASSENGER SIDE
FRAME RAIL
DRIVER SIDE
FRAME RAIL
EXISTING HOLE
(BOTH SIDES)
TOW LOOP
AVAILABLE EURO BALL MOUNT
#45571 (1 7/8"BALL)
#45572 (2" BALL)
DESIGNED FOR USE WITH
BALL MOUNT #45521