Installation Guide

Parts List

DESCRIPTIONPART NUMBERQTYITEM

7/16" FISHWIRE7_16 FISHWIRE41

.250 x .88 x 2.25" SQUARE HOLE SPACERCM-SP242

CARRIAGE BOLT7/16-14 x 1 1/443

HEX FLANGE NUT7/16-1444

INSTALLATION WALKTHROUGH:

For more information log onto www.curtmfg.com

EURO MOUNT

OPTION AVAILABLE

#45571 (1 7/8" BALL)

#45572 (2" BALL)

DESIGNED FOR USE WITH

BALL MOUNT #45521

REAR MOST

ATTACHMNET HOLE

(BOTH SIDES)

FORWARD MOST

ATTACHMENT HOLE

(BOTH SIDES)

DRIVER SIDE

FRAME RAIL

PASSENGER SIDE

FRAME RAIL

1. Locate on driver side frame rail and temporarily remove

emmissions canister by removing (1) fastener using

10mm socket.

NOTE: If present remove frame rail plug, to access rear

mounting point on driver side.

2. On passenger side lower exhaust by removing (2) exhaust

isolators, using isolator removal diagram, to expose heat

shield. Remove (4) speed nuts to lower heatshield from

frame rail.