Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com
3. Trim heat shield as shown in the heat shield diagram.
NOTE: All dimensions are approxiamate, confirm fit prior
to trimming
4. Enlarge forward most attachment hole on both sides using
a die grinder. Use hole enlargement diagram as a reference.
5. Fishwire (1) carriage bolt and (1) CM-SP2 spacer through
enlarged hole and out rearmost hole, on each side, as
shown in the Fishwire Technique Diagram.
6. Reverse fishwire (1) carriage bolt and (1) CM-SP2 spacer
through enlarged hole, on each side, as shown in the
Reverse Fishwire Diagram.
1.00"
2.50"
10.00"