Installation Guide

INSTALLATION WALKTHROUGH:

For more information log onto www.curtmfg.com

Parts List

DESCRIPTIONPART NUMBERQTYITEM

FB,M8x1.25,25,CL10.9,YZ10-1026881

EURO MOUNT

OPTION AVAILABLE

# 45571 (1 7/8" BALL)

# 45572 (2" BALL)

DESIGNED FOR USE WITH

BALLMOUNT # 45521

BUMPER BEAM ASSEMBLY

EXISTING HOLES

AND WELDNUTS

REAR FACE OF VEHICLE CABIN

1. C-HR: Remove (14) push pin fasteners and (3) twist type fasteners attaching

(2) underbody panels to the rear of the vehicle. Locate and remove the (6)

fascia clips holding the lower bumper fascia to the rear bumper body panel.

Corolla Hatchback: Remove the center portion of the rear bumper fascia by

removing the lowest screw from each side of the rear of the bumper cover then

push out the tabs on the back. Note: There are 2 wire harness mounting clips

on the top that need to be removed.

2. Using a 12mm socket, remove the (8) bolts attaching the bumper

assembly to the rear face of the cabin. Lightly pull the lower fascia away

to remove the bumper beam and return flange bolts to vehicle owner.