Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. Trim tab off of heat shields and reinstall the heat shields. Do not reinstall
the (2) screws that attach the heat shield to the frame rails.
4. F
ishwire 1/2-13 x 1 1/2" carriage bolts and CM-SP19 spacers into
p
osition through end of frame rails and out mounting holes.
5. Raise hitch into position and secure it with the supplied 1/2" hex flange
nuts.
6. Usi
ng the hitch as a template, drill the rear holes through the frame rails.
F
ishwire 1/2-13 x 1 3/4" carriage bolts and CM-SP19 spacers into
p
osition and secure with flange nuts.
REMOVE TAB FROM DRIVER AND
PASSENGER SIDE HEAT SHIELD