Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com
3. Enlarge the center hole on each side of the frame to
about 1 1/8" to allow the mounting hardware to pass
though. (Both sides)
4. Fishwire 1/2" carriage bolt and spacer through the front
and rear frame holes in both frame sides then reverse
fishwire the center hole both sides.
5. Raise hitch into place and secure hitch to frame,
using the 1/2" hardware provided. Torque all
hardware to 110ft-lb.
6. Raise exhaust back into place and reattach exhaust
hangers. Install complete.
1 1/8"