Installation Guide

ManualsBrandsCURT ManualsOtherClass 2 Trailer Hitch for Hyundai Santa Fe, Kia Sorento

MAKE: STYLE:

MIN.20

WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY

For more information log onto www.curtmfg.com & for helpful towing tips log onto www.hitchinfo.com

WEIGHT CARRYING:

INSTALLATION TIPS:

INSTALLATION REQUIRES:

VEHICLE PHOTO:

HITCH ILLUSTRATION:

REPRESENTATIVE PHOTO

MAKE SURE YOUR HITCH MATCHES

LEVEL OF DIFFICULTY: MODERATE

MODERATE CHALLENGING

1. BEFORE YOU BEGIN INSTALLATION, READ ALL

INSTRUCTIONS THOROUGHLY.

2. TO EASE INSTALLATION, 2 PEOPLE MAY BE

REQUIRED.

3. USING PROPER TOOLS WILL GREATLY IMPROVE

THE QUALITY OF THE INSTALL AND REDUCE THE

TIME REQUIRED.

4. NEED HELP OR HAVE SOME QUESTIONS?

CALL TECHNICAL SUPPORT AT 877.287.8634

Safety glasses should be

worn at all times while

installing this product.

YEARS:

2013-2018

2014-2015

HYUNDAI

KIA

MODEL:

SANTA FE (2.0/2.4L 4 CYL ONLY)

SORENTO

SUV

3500

350

TRAILER WEIGHT:

TONGUE WEIGHT:

12113 INSTALLATION INSTRUCTIONS

LBS.

WARNING:

ALL NON-TRAILER (WHEEL-LESS) LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED

BY 18050 STABILIZING STRAPS. PLEASE SEE THE CURT CATALOG OR VISIT US ONLINE AT

WWW.CURTMFG.COM FOR FURTHER INFORMATION.

MIN.

MIN.40

IF YOU ARE HESITANT TO UNDERTAKE

THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED

CURT INSTALLER FOR ADDITIONAL ASSISTANCE.

NOVICE INSTALL TIME:

PRO INSTALL TIME:

SCAN FOR

MORE INFO

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND

CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,

CURT Manufacturing LLC. may repair or replace the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product

voids the warranty. CURT Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.

For more information log onto www.curtmfg.com

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.Regulation V-5 and SAE J684.

8/13/2020

EASY

- NO DRILLING REQUIRED

- LOWER SPARE & UNDER

BODY PANELS

RATCHET

TORQUE

WRENCH

SOCKET

EXTENSION

SOCKET

7/16"

3/4"

17mm

SCREW

DRIVER

SAFETY

GLASSES

- CLEAN EXISTING

WELDNUTS

- LOWER EXHAUST

CHANGED WEIGHT RATING FROM 3500/525 TO 3500/350 5/30/2013

AJP

CAPPED KIA COVERAGE AT 2014-2015 7/20/2017

JDB

CAPPED HYUNDAI SANTA FE AT 2013-2018 7/25/2018 KWS

4 UPDATED HARDWARE DESCRIPTIONS/NUMBERS 8/13/2020 CJW

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

Summary of content (4 pages)

PAGE 1
2113 2013-2018 HYUNDAI YEARS: 2014-2015 Safety glasses should be worn at all times while installing this product . INSTALLATION INSTRUCTIONS SANTA FE (2.0/2.4L 4 CYL ONLY) MAKE: KIA MODEL: SORENTO STYLE: SUV WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY For more information log onto www.curtmfg.com & for helpful towing tips log onto www.hitchinfo.com WEIGHT CARRYING: PRO INSTALL TIME: NOVICE INSTALL TIME: TRAILER WEIGHT: TONGUE WEIGHT: 20 MIN. 40 MIN.
PAGE 2
INSTALLATION WALKTHROUGH: 1. Lower and remove spare tire. Parts List ITEM QTY PART NUMBER DESCRIPTION 1 4 10-10297 BOLT, CAR,1/2-13 UNC,4-1/2,GRD8,YZ 2 4 20-00062 NUT,SER-FLANGE,1/2-13 UNC,GRD8,YZ 3 4 10-10373 HHCS,M10X1.25,25,CL10.9,YZ 4 4 30-00163 WASHER, S-CON,7/16,YZ 5 1 12113-SP .188" SPACER PLATE 1 5 PASSENGER SIDE FRAME RAIL DRIVER SIDE FRAME RAIL 2 4 2. Lower exhaust by removing (3) rubber isolators.
PAGE 3
INSTALLATION WALKTHROUGH: 3. Remove the plastic under body panel from the passenger side and the driver side frame rails. Remove (3) fascia screws from the passenger side and (4) from the driver side. Carefully pull down and set aside. 5. Insert 1/2-13 x 4 1/2" carriage bolts through the driver side plate and frame rail, secure using 1/2-13 flange nuts.
PAGE 4
12113 KIA SORENTO & HYUNDAI SANTA FE 8/13/2020 GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 3500 LBS. TRAILER WEIGHT & 350 LBS. TONGUE WEIGHT. ***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.*** HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 877-287-8634 Parts List ITEM QTY PART NUMBER 4 1 10-10297 PASSENGER SIDE FRAME RAIL DESCRIPTION BOLT, CAR,1/2-13 UNC,4-1/2,GRD8,YZ 2 4 20-00062 NUT,SER-FLANGE,1/2-13 UNC,GRD8,YZ 3 4 10-10373 HHCS,M10X1.25,25,CL10.