Installation Manual

Parts List
DESCRIPTIONPART NUMBERQTYITEM
.250 x 1.50 x 2.00" SQUARE HOLE SPACERCM-SP1
61
HEX FLANGE NUT
HFN 121362
CARRIAGE BOLT1/2-13 x 1 3/4
63
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HITCH WEIGHT: LBS.
INSTALL TIME:
MINUTES
INSTALL NOTES:
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
6,000
600
40.8
10
10,000
1,000
13040 / 78144 / RHH13040
11/16/2007
1) Raise hitch into position.
2) Using existing, holes in the frame place 1/2" bolts and spacers through the access slots and
into the
hitch throught the holes in the frame. Tighten with 1/2" flange nuts.
3) Torque all fasteners to 75 lb-ft.
FRAME RAIL
1
2
- NO DRILLING REQUIRED
3
CHEVY/GMC VAN
SAVANNAH / EXPRESS (full size)