Installation Guide

Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
BOLT,CAR,1/2-13 UNC,2,GRD8,YZ
10-1028881
.250 x 1.50 x 4.00" SQUARE HOLE SPACERCM-SP20
42
NUT, SER-FLANGE,1/2-13 UNC,GRD8,YZ
20-0006283
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HITCH WEIGHT: LBS.
INSTALL TIME: MINUTES
INSTALL NOTES:
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
6,000
600
45
10
10,000
1,000
97-02 FORD EXPEDITION & 98-02 LINCOLN NAVIGATOR
6/23/2020
13049
1) Raise hitch into position with the attachments in the vertical portion of the bracket on the outside
of the frame.
2) Install the 1/2" carriage bolt and block into the rearmost attachment holes in each frame rail.
Attach with the flange nut but do not tighten.
3) Insert the 1/2" carriage bolt and block into the forward attachment holes in each frame rail. Attach
with flange nuts and tighten.
4) Torque all fasteners to 110 lb-ft.
1
2
3
DRIVER SIDE
FRAME RAIL
- NO DRILLING REQUIRED
1 GENERIC INSTRUCTION SHEET 7/21/2007 DWS
2 REMOVED HITCH INFO 11/16/2007 DWS
3
REMOVED REDLINE/REDNECK NUMBERS 2/2/12 BDF
4
CHG TO GRADE 8 TORQUE SPECS
7/18/2012
AJP
5
CHANGED END COVERAGE ON BOTH APPLICATIONS FROM
2003 TO 2002
1/29/2016
JDB
6
UPDATED HARDWARE NUMBERS/DESCRIPTIONS 6/23/2020 CJW
REVISION HISTORY
REV DESCRIPTION DATE APPROVED
PASSENGER SIDE
FRAME RAIL