Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com
1. Remove (4) existing M14 bolts. These bolts will be used for
hitch installation.
Note: If factory tow loop is present you will need to remove
it prior to install. Trim excess caulk on vehicle frame rails if
it interferes with hitch installation.
2. Raise hitch into position and reinstall (4) M14 bolts. Torque
all M14 hardware to 126 ft-lbs.
Install is complete.
EXISTING WELDNUTS
(BOTH SIDES)
EXISTING HARDWARE
(BOTH SIDES)
DRIVER SIDE FRAME RAIL
PASSENGER SIDE FRAIL
h
h
h