Installation Guide

ManualsBrandsCURT ManualsAutomotiveCURT 13066 Black 2" Class 3 Trailer Hitch Receiver for 2010-2015 Hyundai Tucson, 2011-2015 Kia Sportage

MAKE: STYLE:

MIN.15

WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY

For more information log onto www.curtmfg.com & for helpful towing tips log onto www.hitchinfo.com

WEIGHT CARRYING:

INSTALLATION TIPS:

INSTALLATION REQUIRES:

VEHICLE PHOTO:

HITCH ILLUSTRATION:

REPRESENTATIVE PHOTO

MAKE SURE YOUR HITCH MATCHES

LEVEL OF DIFFICULTY:

EASY

EASY MODERATE CHALLENGING

1. BEFORE YOU BEGIN INSTALLATION, READ ALL

INSTRUCTIONS THOROUGHLY.

2. TO EASE INSTALLATION, 2 PEOPLE MAY BE

REQUIRED.

3. USING PROPER TOOLS WILL GREATLY IMPROVE

THE QUALITY OF THE INSTALL AND REDUCE THE

TIME REQUIRED.

4. NEED HELP OR HAVE SOME QUESTIONS?

CALL TECHNICAL SUPPORT AT 800.798.0813

Safety glasses should be

worn at all times while

installing this product

YEARS: 2011-2015 KIA MODEL:

SPORTAGE (EXCLUDING SX)

SUV

3,500

350

TRAILER WEIGHT:

TONGUE WEIGHT:

13066 INSTALLATION INSTRUCTIONS

LBS.

WARNING:

WE RECOMMEND THE USE OF 18050 STABILIZING STRAPS FOR ALL NON-TRAILER (WHEEL-LESS) LOADS. PLEASE SEE

THE CURT CATALOG OR VISIT US ONLINE AT WWW.CURTMFG.COM FOR FURTHER INFORMATION.

MIN.

MIN.15

IF YOU ARE HESITANT TO UNDERTAKE

THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED

CURT INSTALLER FOR ADDITIONAL ASSISTANCE.

NOVICE INSTALL TIME:

PRO INSTALL TIME:

SCAN FOR

MORE INFO

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND

CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,

CURT Manufacturing LLC. may repair or replace the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product

voids the warranty. CURT Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.

For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.Regulation V-5 and SAE J684.

2/25/2016

2010-2015 HYUNDAI TUCSON SUV

- NO DRILLING REQUIRED

TORQUE

WRENCH

RATCHET

WIRE PIPE

BRUSH

SOCKET

17mm

SOCKET

EXTENSION

- MAY REQUIRE WELDNUT

CLEANING

Summary of content (4 pages)

PAGE 1
3066 YEARS: 2011-2015 2010-2015 Safety glasses should be worn at all times while installing this product . INSTALLATION INSTRUCTIONS MODEL: SPORTAGE (EXCLUDING SX) TUCSON MAKE: KIA HYUNDAI STYLE: SUV SUV WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY For more information log onto www.curtmfg.com & for helpful towing tips log onto www.hitchinfo.com WEIGHT CARRYING: PRO INSTALL TIME: NOVICE INSTALL TIME: TRAILER WEIGHT: TONGUE WEIGHT: 15 MIN. 15 MIN.
PAGE 2
INSTALLATION WALKTHROUGH: Parts List PART NUMBER 1. Locate weldnuts in frame rails. ITEM QTY DESCRIPTION 1 4 M10 - 1.25 x 30 HEX BOLT 2 4 3/8" CONICAL TOOTHED WASHER TUCSON / SPORTAGE TUCSON SPORTAGE TUCON / SPORTAGE 2 2. Raise hitch into position aligning holes in side plates with weldnuts and secure using M10-1.25 x 30mm bolts and 3/8" conical toothed washers. Note: For ease of installation, raise passenger side first then driver side. 1 For more information log onto www.curtmfg.
PAGE 3
INSTALLATION WALKTHROUGH: 3. Torque all M10 fasteners to 48 ft-lbs. INSTALLATION IS NOW COMPLETE For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.
PAGE 4
13066 HYUNDAI TUCSON / KIA SPORTAGE EXCLUDING SX 7/12/2012 GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 3,500 LBS. TRAILER WEIGHT & 350 LBS. TONGUE WEIGHT. WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY 18050 STABILIZING STRAPS. WARNING: ** FAILURE TO PROPERLY SUPPORT NON-TRAILER LOADS WILL VOID PRODUCT WARRANTY ** WARNING: *** DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY *** FOR MORE INFORMATION LOG ONTO WWW.CURTMFG.