Installation Guide

INSTALLATION WALKTHROUGH:

For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com

Parts List

DESCRIPTION

PART NUMBER

QTY

ITEM

NUT,SER-FLANGE,1/2-13 UNC,GRD8,YZ

20-0006221

BOLT,CAR,1/2-13 UNC,1-1/4,GRD8,YZ10-1027822

3/8-16 x1.5x1 SQUARE U-BOLT

10-1046023

NUT,SER-FLANGE,3/8-16 UNC,GRD5,CZ

20-0009944

.250 x 1.25 x 2.50" SQUARE SPACERCM-SP17

3/8" FISHWIRE3_8 FISHWIRE

(READ ALL STEPS BEFORE BEGINNING INSTALLATION)

1. Remove the bumper fascia by removing (4) T-20 Torx bit

screws (2) from the trunk (1) from each wheel well, and

disconnect (1) snap tab on each side from the bumper to the

support strap.

2. Remove lower bumper fascia by lightly pulling along the

snap groove, which spans the length of the bumper and

disconnect (4) sensor plugs if equipped.Set fascia aside

for reassembly.

(Note: Audi Q5-S, SQ5 models require removal of entire fascia.)

PORSCHE MODELS DRILL

MOUNTING HOLES

EXHAUST HANGER

TO BE LOWERED

(BOTH SIDES)

DRIVER SIDE

FRAME SUPPORT

TRUNK PAN

PASSENGER SIDE

FRAME SUPPORT