User Manual

ManualsBrandsCURT ManualsAutomotiveCURT 13152 Black 2" Class 3 Trailer Hitch Receiver for 2013-2018 Hyundai Santa Fe, 2014-2015 Kia Sorento

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND

CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing LLC. may repair or replace

the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement

of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.

For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com

MAKE:

STYLE:

WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY

WEIGHT CARRYING:

INSTALLATION TIPS:

INSTALLATION REQUIRES:

VEHICLE PHOTO:

HITCH ILLUSTRATION:

REPRESENTATIVE PHOTO

MAKE SURE YOUR HITCH MATCHES

LEVEL OF DIFFICULTY:

MODERATE

EASY MODERATE CHALLENGING

1. BEFORE YOU BEGIN INSTALLATION, READ ALL

INSTRUCTIONS THOROUGHLY.

2. TO EASE INSTALLATION, 2 PEOPLE MAY BE

REQUIRED.

3. USING PROPER TOOLS WILL GREATLY IMPROVE

THE QUALITY OF THE INSTALL AND REDUCE THE

TIME REQUIRED.

4. NEED HELP OR HAVE SOME QUESTIONS?

CALL TECHNICAL SUPPORT AT 800.798.0813

Safety glasses should be

worn at all times while

installing this product

YEARS:

2014-2015

KIA

MODEL:

SORENTO (ALL)

SUV

6,000

900

TRAILER WEIGHT:

TONGUE WEIGHT:

13152 INSTALLATION INSTRUCTIONS

LBS.

7/20/2017

WEIGHT DISTRIBUTION:

TRAILER WEIGHT:

TONGUE WEIGHT:

8,000

900

LBS.

MIN.

PRO INSTALL TIME:

NOVICE INSTALL TIME:

IF YOU ARE HESITANT TO UNDERTAKE

THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED

CURT INSTALLER FOR ADDITIONAL ASSISTANCE.

2013-PRESENT

YEARS:

MAKE:

HYUNDAI

MODEL:

SANTA FE (2.0 / 2.4L 4 CYL ONLY)

- NO DRILLING REQUIRED

- LOWER SPARE & UNDER

BODY PANELS

RATCHET

TORQUE

WRENCH

SOCKET

EXTENSION

SOCKET

7/16"

3/4"

17mm

SCREW

DRIVER

SAFETY

GLASSES

- CLEAN EXISTING

WELDNUTS

- LOWER EXHAUST

Summary of content (4 pages)

PAGE 1
3152 Safety glasses should be worn at all times while installing this product . INSTALLATION INSTRUCTIONS YEARS: 2013-PRESENT MAKE: HYUNDAI MODEL: SANTA FE (2.0 / 2.4L 4 CYL ONLY) YEARS: 2014-2015 MAKE: KIA MODEL: SORENTO (ALL) STYLE: SUV WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY WEIGHT CARRYING: PRO INSTALL TIME: NOVICE INSTALL TIME: TRAILER WEIGHT: TONGUE WEIGHT: 20 MIN. 40 MIN.
PAGE 2
INSTALLATION WALKTHROUGH: ITEM QTY Parts List PART NUMBER 1. Lower and remove spare tire. DESCRIPTION 1 4 1/2-13 x 4 1/2 CARRIAGE BOLT 2 4 HFN 1213, GR8 HEX FLANGE NUT 3 4 M10 - 1.25 x 25 HEX BOLT 4 4 3/8" CONICAL TOOTHED WASHER 5 1 13152-SP 11GA. (.1196) SPACER PLATE 1 PASSENGER SIDE FRAME RAIL 5 DRIVER SIDE FRAME RAIL 2 2. Lower exhaust by removing (3) rubber isolators. 4 3 For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.
PAGE 3
INSTALLATION WALKTHROUGH: 3. Remove the plastic under body panel from the passenger side and the driver side frame rails. Remove (3) fascia screws from the passenger side and (4) from the driver side. Carefully pull down and set aside. 5. Insert 1/2-13 x 4 1/2" carriage bolts through the driver side plate and frame rail, secure using 1/2-13 flange nuts.
PAGE 4
HYUNDAI SANTA FE (2.0 / 2.4L 4 CYL ONLY) KIA SORENTO (ALL) 13152 7/20/2017 GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 6,000 LBS. TRAILER WEIGHT & 900 LBS. TONGUE WEIGHT. GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: 8,000 LBS. TRAILER WEIGHT & 900 LBS. TONGUE WEIGHT ***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.