Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. Insert 1/2-13 x 4 1/2" carriage bolts through the side plates
and frame rails, secure using 1/2-13 flange nuts.
Note: You may need to bend or trim the bumper locator pin
to allow hardware clearance.
4. Torque all 1/2" hardware to 110 ft-lbs.
Torque all 10mm hardware to 48 ft-lbs.
If lowered, raise spare tire back into position.
Reinstall the bumper fascia panel removed in Step (1).
INSTALLATION COMPLETE
BENDING BUMPER
LOCATOR PIN
BENT BUMPER
LOCATOR PIN