Installation Guide

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-877-287-8634
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
4,000 600
4,000
600
MITSUBISHI OUTLANDER
7/29/2019
13163
60
41
30
HITCH WEIGHT:
LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
- NO DRILLING
- FISHWIRE HARDWARE
- REMOVE TOW LOOP
Parts List
DESCRIPTIONPART NUMBERQTYITEM
BOLT, CAR,7/16-14 UNC,1-1/2,GRD8,YZ
10-1028221
BOLT, CAR,1/2-13 UNC,4-1/2,GRD8,YZ
10-1029742
HHCS,M10x1.25,35,CL10.9,YZ
10-1029823
NUT, SER-FLANGE,1/2-13 UNC,GRD8,YZ20-0006244
NUT, SER-FLANGE,7/16-14 UNC,GRD8,YZ20-001032
5
WASHER, S-CON,7/16,YZ30-0016326
.250 x .88 x 2.25" SQUARE HOLE SPACERCM-SP22
7
1/2" FISHWIRE1_2 FISHWIRE28
7/16" FISHWIRE7_16 FISHWIRE
29
.250" SPACER PLATE13163-SP
210
2
4
6
3
8
10
PASSENGER SIDE
FRAME RAIL
DRIVER SIDE
FRAME RAIL
EXISTING 8mm
BUMPER BOLT
TOW LOOP
EXISTING TOW
LOOP BOLTS
REAR FASCIA
TOOLS REQUIRED
RATCHET
TORQUE WRENCH
SOCKET EXTENSION
12mm SOCKET
14mm SOCKET
17mm SOCKET
3/4" SOCKET
SCREWDRIVER
SAFETY GLASSES
1
7
5
9