Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
Parts List
DESCRIPTIONPART NUMBERQTYITEM
NUT PLATE WELDMENTCM-NP1W21
HEX BOLT1_2 - 13 x 5 HEX 82
HEX FLANGE NUT7/16-1423
CONICAL TOOTHED WASHER1/2"
124
CARRIAGE BOLT7/16-14 x 12
5
HEX BOLT1/2 - 13 x 2 1/2
46
NUT PLATE WELDMENT13177-NPW17
2
3
6
4
5
1. Remove 3 fascia clips from each side of the vehicle with a
flat head screwdriver. This will allow for the fascia to flex
slightly for socket access during installation.
2. Remove exhaust tips by removing T40 torx screws from 3
locations on each side of the vehicle with a short torx bit and
ratchet extension. Tips will be reinstalled when hitch
installation is complete.
1
VEHICLE CROSSMEMBER
POSITION ABOVE
VEHICLE CROSSMEMBER
POSITION
UNDER VEHICLE
CROSSMEMBER
MOUNTING
STRAP
DRIVER SIDE
BUMPER BEAM
PASSENGER SIDE
BUMPER BEAM
7