Installation Guide

I NSTALLATI ON WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
9. Raise mounting strap behind vehicle crossmember, as
shown.
10. Secure mounting strap to hitch with finger tightened 7/16"
hex flange nuts.
11. Raise nut plate in front of vehicle cross member.
12. Secure nut plate to mounting strap with finger tightened
1/2" x 2 1/2" hex bolts and 1/2" conical toothed washers.
13. Torque all 1/2-13 x 5" hex bolts to 75 lb-ft. Torque all
remaining 1/2" hardware to 110 lb-ft and all 7/16"
hardware to 70 lb-ft.
14. Raise exhaust back into position.
15. Reattach exhaust tip (3 mounting locations each side.)
16. Reattach fascia clips (3 locations each side of vehicle.)
Installation is complete.