Installation Guide

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
1-877-287-8634
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
6,000 600
10,000 1,000
NISSAN PATHFINDER ARMADA / INFINITI QX56
08/10/2020
13188
30
33
15
HITCH WEIGHT: LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
78272 / 757688
Parts List
DESCRIPTIONPART NUMBERQTYITEM
HHCS,M12x1.25,40CL10.9,YZ10-1027761
WASHER,S-CON,1/2,YZ30-0014962
1
2
EXISTING WELD NUTS
FRAME RAIL
NO DRILLING REQUIRED
1. If present, removed black panel on bumper fascia by removing the push fastener.
Note: Panel maybe rivited on.
2. Raise hitch into position. Fasten hitch as shown by threading 12mm x 40mm Lg. bolts
and conical washers into existing weld nuts.
3. Torque 12mm fasteners to 86 lb.-ft.