Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
NOTE: REUSE EXISTING FACTORY HARDWARE
1) Remove exhaust tips by removing (4) Torx
T40 bolts, (2) per side. Set aside for
reassembly.
NOTE: For other models remove (4) Torx
T30 bolts.
2) Lower exhaust hanger bracket, by
removing (2) M10 bolts, (1) per side.
REAR VEHICLE
FASCIA
VEHICLE BUMPER
BEAM
VEHICLE HEAT
SHIELD
(TRIMMED)
USE EXISTING
VEHICLE MOUNTING
HARDWARE