Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3.) Check to be sure that all wiring clears and slowly pull
factory cross member or hitch downward and remove from
vehicle. Clean weldnuts as needed with lubricant and
brush. Replace with CURT hitch, which will mount in the
space between the frame and the bumper mounting plates.
4.) Using the existing mounting hardware, attach the bottom
mounting bolts (2 places each side) and loosely secure so
that bumper placement adjustments can be made. Adjust
bumper position to align with side mounting holes and
secure remaining (4) bolts with a 21mm socket.
5.) Torque all M14 bolts to 126 ft-lbs.
6.) Reinstall all bolts loosened / removed in step 1. Raise
the spare tire back into position.