Installation Guide

Parts List
DESCRIPTIONPART NUMBERQTYITEM
HHCS,M12x1.25,30,CL10.9,YZ
10-1041951
WASHER,S-CON,1/2,YZ30-0014952
INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
PASSENGER SIDE
FRAME RAIL
DRIVER SIDE
FRAME RAIL
EXISTING WELDNUTS
EXISTING WELDNUTS
2
1
1. If present, remove the (4) bolts holding the tie down
bracket onto the vehicle and return to the owner.
2. Use a M12 - 1.25 tap to clean under coating from existing
weldnuts if required.
3. Raise hitch into position between exhaust tip(s) and attach
to vehicle using the supplied 12mm bolts and washers.
4. Torque all 12mm fasteners to 86 lb-ft.