Installation Manual

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
HOLE ENLARGEMENT
DIAGRAM
3. Remove the (2) rubber plugs in each frame rail. Enlarge the
forwardmost hole on each frame rail to allow the carriage
bolt and spacer to be inserted into the frame rail.
(See Hole Enlargement Diagram.)
4. Fishwire a carriage bolt and spacer into the rearmost
hole in each frame rail as shown leaving fishwire attached.
(See Fishwire Technique.)
5. Raise the hitch into position. Center the hitch on the vehicle,
remove fishwire, and loosely secure the hitch to the vehicle
with hex flange nuts as shown.
6. Mark and drill the forwardmost holes in the frame rail using
the hitch as your template. Fishwire a carriage bolt and
spacer into each drilled hole and secure the hitch with a
hex flange nut as shown.
REMOVE
1.125 in