Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
BOLT,CAR,9/16-12 UNC,2-1/2,GRD8,YZ10-1045511
BOLT,CAR,9/16-12 UNC,2,GRD8,YZ10-1032912
.313 x 1.00 x 2.50" 9/16" SQUARE HOLE SPACERCM-SP70
23
NUT,SER-FLANGE,9/16-12 UNC,GRD8,YZ20-001042
4
9/16" FISHWIRE9_16 FISHWIRE
25
NUT,HANDLE,1/2-13 UNC,GRD8,CZ20-0017426
HHCS,1/2-13 UNC,5-1/2,GRD8,YZ
10-1029527
WASHER,FLAT,1/2,YZ30-0013328
HHCS,1/2-13 UNC,1-1/2,GRD8,YZ
10-1033429
WASHER,S-CON,1/2,YZ30-00149210
NUT,SER-FLANGE,1/2-13 UNC,GRD8,YZ
20-00062211
.625 x 2.00 SPACER13207-SP112
SPRING SHCKLE
MOUNT
EXHAUST PIPE
DRIVER SIDE
FRAME RAIL
PASSENGER SIDE
FRAME RAIL
2
4
7
8
11
5
9
10
6
12
3
1
1. Remove the rearwardmost rubber plugs in the frame rails
and foil (if present) covering the mounting holes. Return
to owner. Fishwire the 9/16" x 2 1/2" carriage bolt and
CM-SP70 spacer on the side with the recovery loop, and
the 9/16" x 2" carriage bolt and CM-SP70 spacer into the
holes that had the rubber plugs.
2a. Raise the hitch on the driver side with the forwardmost
tab over the leaf spring and angle hitch to get the
forwardmost tab on the passenger side over the leaf
spring. Once in position, lift the driver side bracket up
to the frame rail and slide the hitch over the rear bumper
stud and the inner frame stud.