Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. On V6 models: Locate and remove nut from exhaust clamp that holds the
driver side muffler. Save nut
for reinstallation.
On V8 models: Locate and remove (2) nuts with springs attaching driver side
muffler. Save nuts and
springs for reinstallation.
Slide and remove temporarily driver side muffler/tube off of remaining exhaust
system.
4. Fishwire 1/2" carriage bolts and CM-SP40 spacers through
access hole on driver and passenger side frame rail. Pull
hardware through existing holes (2 on passenger side and
1 on driver side).
5. Raise hitch into position by placing passenger side of hitch
over the passenger side muffler first and then raise the driver
side of hitch. Secure hitch to existing weldnuts with supplied
M12 hardware and conical toothed washers. Attach 1/2" hex
flange nuts onto carriage bolts.
6. Torque 1/2" hardware to 110 lb-ft and M12 hardware to
79 lb-ft.