Installation Guide

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HITCH WEIGHT: LBS.
INSTALL TIME:
MINUTES
INSTALL NOTES:
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
5,000 500
34
20
7,500
750
13245 JEEP LIBERTY
6/17/2020
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
WASHER,S-CON,1/2,YZ30-0014961
HHCS,M12x1.75,40,CL10.9,YZ10-1038662
TOOLS REQUIRED
3/8" DRIVE RATCHET
18mm 3/8" DRIVE SOCKET
19mm 3/8" DRIVE SOCKET
3/8" DRIVE TORQUE WRENCH
- NO DRILLING REQUIRED
- REMOVE EXISTING BOLT
EXISTING WELD NUTS
IN FRAME RAILS
(BOTH SIDES)
DRIVER SIDE
FRAME RAIL
PASSENGER SIDE
FRAME RAIL
1
2
1) Remove bolt from driver's side vehicle support bracket and return to vehicle owner.
2) Raise hitch into position.
3) Position hitch over frame and support bracket (driver side) and loosely install the supplied fasteners as
shown.
4) Torque all 12mm fasteners to 79 lb-ft.
VEHICLE
SUPPORT
BRACKET