Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
Parts List
DESCRIPTIONPART NUMBERQTYITEM
1/2" x 30" FISHWIRE1_2 x 30 FISHWIRE
21
HHCS,M12x1.25,40CL10.9,YZ10-1027742
WASHER,S-CON,1/2,YZ
30-0014943
NUT, SER-FLANGE,1/2-13 UNC,GRD8,YZ20-0006224
BOLT,CAR,1/2-13 UNC,1-3/4,GRD8,YZ
10-1027225
.250 x 1.25 x 3.00" SQUARE HOLE SPACERCM-SP1926
PASSENGER SIDE
FRAME RAIL
DRIVER SIDE
FRAME RAIL
2
3
2. Raise hitch into position between bumper mount plates and
align slots in hitch with existing vehicle weldnuts in the
frame rails. Install (4) M12-1.25 hex bolts and (4) 1/2" conical
toothed washers into existing weldnuts, as shown.
4
5
6
1. Fishwire (2) 1/2" carriage bolts and (2) CM-SP19 spacers
through ends of bumper beam and out mounting
holes as shown.
(See BUMPER BEAM FISHWIRE DIAGRAM)
1
BUMPER BEAM
EXISTING HOLES
BUMPER MOUNT PLATE
(BOTH SIDES)