Installation Guide

Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
NUT, HANDLE, SER-FLANGE,7/16-14 UNC,GRD8,YZ
20-0017261
BOLT,CAR,7/16-14 UNC,1-1/2,GRD8,YZ
10-1028242
BOLT,CAR,7/16-14 UNC,2,GRD8,YZ
10-1031723
7/16" FISHWIRE7_16 FISHWIRE
24
.250 x 1.00 x 2.50" SQUARE HOLE SPACERCM-SP11
4
5
.250 x 1.00 x 2.00" SQUARE HOLE SPACERCM-SP7
26
.500 x 1.25 x 2.50" ROUND HOLE SPACERCM-SP52
2
7
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 877-287-8634
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
4,000 400
4,500
450
VOLVO XC60
7/27/2020
13268
120
32
60
HITCH WEIGHT: LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
3
6
7
1
2
5
4
DRIVER SIDE
FRAME RAIL
PASSENGER SIDE
FRAME RAIL
FISHWIRE HARDWARE THROUGH
END OF FRAME RAIL
(BOTH SIDES)
ACCESS HOLE (BOTH SIDES)
- NO DRILLING REQUIRED
- LOWER EXHAUST
- FISHWIRE HARDWARE
- HEAT SHIELD TRIMMING REQUIRED
PAGE 1 of 2
1
CHG TO GRADE 8 TORQUE SPECS
9/28/2012
AJP
2 ADDED NOTE IN INSTALL STEPS FOR 2015 NEWER W/DUAL EXHAUST 12/22/2014 KWS
3
DELETED THE SPECIFIC NUMBER OF FASTNERS TO BE REMOVED 9/14/2015 DAM
4 UPDATED HARDWARE DESCRIPTIONS/NUMBERS 7/27/2020 CJW
REVISION HISTORY
REV DESCRIPTION DATE APPROVED