Installation Guide

Parts List

DESCRIPTIONPART NUMBERQTYITEM

FASCIA TAB BRACKET13294-FTB21

.344" X .813" BLACK NYLON TRIM PANEL RETAINER1112049722

1/4-20 x 1.00 HEX BOLT1_4-20 x 1.00 HEX BOLT43

HEX FLANGE NUT1/4-2044

INSTALLATION WALKTHROUGH:

For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com

1. On the fascia tab bracket, locate and remove (2) screws

from rear fascia and (1) nut located on top of bracket using

10mm socket. Remove bracket and return to owner.

2. Lower exhaust by removing rubber isolator from hanger

attached to vehicle frame, (1) on each side. Support exhaust

to prevent damage.

(See Rubber Isolator Removal Diagram)

NOTE: Removing exhaust tips using T-40 socket may ease

installation.

VEHICLE FRAME

VEHICLE HARDWARE

(BOTH SIDES)

VEHICLE REAR

BUMPER FASCIA

VEHICLE BUMPER BEAM