Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
7. After all (8) bumper beam nuts have been removed, with
rear fascia still attached, push bumper beam away from
vehicle to sandwich hitch between bumper beam and vehicle.
Loosely secure vehicle hardware.
NOTE: Completing one side at a time may ease installation
8. Secure provided fascia tab brackets to hitch main body
plates, with 1/4" hardware, using 7/16 socket and 7/16"
boxed end wrench. Align and secure (2) center fascia tabs
by pushing nylon retainer clips into fascia tab brackets.
INSTALLATION COMPLETE
9. Torque all 1/4" hardware to 10 ft-lbs and all M10
hardware to 45 ft-lbs. Reinstall following steps 2 - 4 in
reverse order.