Installation Guide

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HITCH WEIGHT: LBS.
INSTALL TIME: MINUTES
INSTALL NOTES:
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
5,000 500
27
20
02-05 MERCEDES G500 (463 CHASSIS)
10/15/2012
13318 / 757350
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
2.00 X 0.88 X .125 SPACERCM-SP10841
HELICAL LOCK WASHER7/16 LOCK WASHER82
HEX NUT7/16-1443
CARRIAGE BOLT7/16-14 x 1 1/2
44
HEX BOLT
M10 - 1.5 x 40mm45
WASHER3/8"46
PASSENGER SIDE FRAME RAIL
EXISTING WELD NUTS(BOTH SIDES)
DRIVER SIDE FRAME RAIL
- NO DRILLING REQUIRED
1. Locate the tow loop extensions projecting from the driver and passenger
side frame rails, and the angled plate on vehicle center as shown.
2. Use fasteners to mount the hitch as shown.
3. Room to wrench fasteners is limited. Wrenching may be easier from
the rear of vehicle.
4. Torque 10mm fasteners to 45 lb-ft.
Torque 7/16" carriage bolts to 70 lb-ft.
4
1
2
6
3
5

Summary of content (1 pages)