Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com
FACTORY HARDWARE
(M10 - 1.5 x 40mm
HEX FLANGE BOLTS)
PASSENGER SIDE FRAME RAIL
DRIVER SIDE FRAME RAIL
EXISTING WELDNUTS
(BOTH FRAME RAILS)
1. Lowerexhaustbyremoving(2)boltsfromeachrear
exhaust     hanger brackets (1 per side) using a 13mm
socket.Remove  ‐   (4) M10 1.5 x 40mm boltsfromthe
outside         of the frame rails with a 16mm socket (2 per
side).
2. Raisehitchintopositionandreinstallthe(4)M10bolts
removed         ‐in step 1. Torgue all M10 bolts to 45 lb ft.
3.
Raiseexhaustbackintopositionandreinstallremaining
fasteners   removed in step 1.