Installation Guide

ManualsBrandsCURT ManualsOtherClass 3 Trailer Hitch, 2" Receiver, Select Chevrolet Silverado, GMC Sierra 1500, Towing Draw Bar

MAKE: STYLE:

WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY

For more information log onto www.curtmfg.com & for helpful towing tips log onto www.hitchinfo.com

WEIGHT CARRYING:

INSTALLATION TIPS:

INSTALLATION REQUIRES:

VEHICLE PHOTO:

HITCH ILLUSTRATION:

REPRESENTATIVE PHOTO

MAKE SURE YOUR HITCH MATCHES

LEVEL OF DIFFICULTY: MODERATE

EASY MODERATE CHALLENGING

1. BEFORE YOU BEGIN INSTALLATION, READ ALL

INSTRUCTIONS THOROUGHLY.

2. TO EASE INSTALLATION, 2 PEOPLE MAY BE

REQUIRED.

3. USING PROPER TOOLS WILL GREATLY IMPROVE

THE QUALITY OF THE INSTALL AND REDUCE THE

TIME REQUIRED.

4. NEED HELP OR HAVE SOME QUESTIONS?

CALL TECHNICAL SUPPORT AT 877.287.8634

Safety glasses should be

worn at all times while

installing this product.

YEARS: 2019-PRESENT

CHEVROLET / GMC

MODEL:

1500 SILVERADO / 1500 SIERRA

PICKUP

6,000

600

TRAILER WEIGHT:

TONGUE WEIGHT:

13393 INSTALLATION INSTRUCTIONS

LBS.

WEIGHT DISTRIBUTION:

TRAILER WEIGHT:

TONGUE WEIGHT:

10,000

1,000

LBS.

110MIN.

MIN. PRO INSTALL TIME:

NOVICE INSTALL TIME:

IF YOU ARE HESITANT TO UNDERTAKE

THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED

CURT INSTALLER FOR ADDITIONAL ASSISTANCE.

SCAN FOR

MORE INFO

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND

CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,

CURT Manufacturing LLC. may repair or replace the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product

voids the warranty. CURT Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.

For more information log onto www.curtmfg.com

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.Regulation V-5 and SAE J684.

5/19/2020

SAFETY

GLASSES

RATCHET

TORQUE

WRENCH

PART REMOVAL

NO DRILLING REQUIRED

TEMPORARILY LOWER EXHAUST

AND EXHAUST BEZEL (DUAL

EXHAUST MODELS ONLY)

SOCKET

EXTENSION

SOCKET

10mm

15mm

21mm

1 ADDED NOTE TO BEND FACTORY TOW LOOPS

5676

5/16/2019 KWS

2 UPDATED PHONE NUMBER

6641

5/19/2020 CJW

REVISION HISTORY

REV DESCRIPTION ECN# DATE APPROVED

Summary of content (5 pages)

PAGE 1
3393 MAKE: CHEVROLET / GMC YEARS: 2019-PRESENT Safety glasses should be worn at all times while installing this product . INSTALLATION INSTRUCTIONS MODEL: 1500 SILVERADO / 1500 SIERRA STYLE: PICKUP WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY For more information log onto www.curtmfg.com & for helpful towing tips log onto www.hitchinfo.com WEIGHT CARRYING: PRO INSTALL TIME: NOVICE INSTALL TIME: TRAILER WEIGHT: TONGUE WEIGHT: 60 MIN. 110 MIN.
PAGE 2
INSTALLATION WALKTHROUGH: Vehicles with Dual Exhaust System (skip to step 3 for Single Exhaust) 1. Using a 15mm socket, remove the exhaust hanger bracket on the driver side. Remove the passenger side exhaust hanger bracket hardware but leave the bracket on the exhaust hanger. PASSENGER SIDE FRAME RAIL 2. Using a 10mm socket, locate and remove the (3) hex bolts securing the driver side exhaust bezel. Save for reinstallation. SPRING SHACKLE DRIVER SIDE FRAME RAIL SPRING SHACKLE 3.
PAGE 3
INSTALLATION WALKTHROUGH: 4. Raise hitch into position, loosely secure the side plates to the frame using the factory hardware. Move the exhaust out of the way if necessary. 6. Torque the factory hardware to 126 ft-lbs. 7. Re-install exhaust hanger brackets removed in step 1 and bezel removed in step 2. For more information log onto www.curtmfg.
PAGE 4
PAGE 5
13393 CHEVROLET SILVERADO 1500 / GMC SIERRA 1500 5/19/2020 GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 6,000 LBS. TRAILER WEIGHT & 600 LBS. TONGUE WEIGHT. GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: 10,000 LBS. TRAILER WEIGHT & 1,000 LBS. TONGUE WEIGHT WARNING: *** DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY. *** FOR MORE INFORMATION LOG ONTO WWW.CURTMFG.