Owners manual

ManualsBrandsCurt ManualsAutomotiveCURT 13410 Class III 2 in. Receiver Hitch Fits 10-19 Outback

MAKE: STYLE:

WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY

For more information log onto www.curtmfg.com & for helpful towing tips log onto www.hitchinfo.com

WEIGHT CARRYING:

INSTALLATION TIPS:

INSTALLATION REQUIRES:

VEHICLE PHOTO:

HITCH ILLUSTRATION:

REPRESENTATIVE PHOTO

MAKE SURE YOUR HITCH MATCHES

LEVEL OF DIFFICULTY:

MODERATE

MODERATE CHALLENGING

1. BEFORE YOU BEGIN INSTALLATION, READ ALL

INSTRUCTIONS THOROUGHLY.

2. TO EASE INSTALLATION, 2 PEOPLE MAY BE

REQUIRED.

3. USING PROPER TOOLS WILL GREATLY IMPROVE

THE QUALITY OF THE INSTALL AND REDUCE THE

TIME REQUIRED.

4. NEED HELP OR HAVE SOME QUESTIONS?

CALL TECHNICAL SUPPORT AT 800.798.0813

Safety glasses should be

worn at all times while

installing this product

YEARS:

2010-PRESENT SUBARU MODEL:

OUTBACK (EXCLUDING SPORT)

WAGON

4,000

600

TRAILER WEIGHT:

TONGUE WEIGHT:

13410 INSTALLATION INSTRUCTIONS

LBS.

MIN.

PRO INSTALL TIME:

NOVICE INSTALL TIME:

IF YOU ARE HESITANT TO UNDERTAKE

THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED

CURT INSTALLER FOR ADDITIONAL ASSISTANCE.

SCAN FOR

MORE INFO

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND

CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,

CURT Manufacturing LLC. may repair or replace the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product

voids the warranty. CURT Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.

For more information log onto www.curtmfg.com

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.Regulation V-5 and SAE J684.

10/3/18

EASY

PART REMOVAL

NO DRILLING REQUIRED

BUMPER AND TAIL LIGHT

REMOVAL REQUIRED

TRIMMING REQUIRED

MASKING

TAPE

RATCHET

SCREW

DRIVERS

TAPE

MEASURE

AVIATION

SHEARS

SOCKET

10mm

14mm

TORQUE

WRENCH

SAFETY

GLASSES

Summary of content (5 pages)

PAGE 1
3410 YEARS: 2010-PRESENT Safety glasses should be worn at all times while installing this product . INSTALLATION INSTRUCTIONS MAKE: SUBARU MODEL: OUTBACK (EXCLUDING SPORT) STYLE: WAGON WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY For more information log onto www.curtmfg.com & for helpful towing tips log onto www.hitchinfo.com WEIGHT CARRYING: PRO INSTALL TIME: NOVICE INSTALL TIME: TRAILER WEIGHT: TONGUE WEIGHT: 45 MIN. 90 MIN.
PAGE 2
INSTALLATION WALKTHROUGH: 1. Remove the tail light plastic push fasteners with a straight and phillips screw driver and the (2) screws with a 10mm socket. 2. Pull each tailight rearward and unhook the wiring connector to remove the lens. REAR VEHICLE BULKHEAD REAR VEHICLE BULKHEAD 3. Using a screw driver, remove the (3) push fasteners in the rear wheel wells holding the bumper cover. If mud flaps are present, remove the (3) screws holding on each side as well. EXISTING 10mm - 1.
PAGE 3
INSTALLATION WALKTHROUGH: 4. Remove the (7) push fasteners along the edge of the bumper cover with a straight screwdriver. When removed, work from one side and gently pull the bumper cover away from the vehicle. 6. Fold the center bumper cover mounting tab flat against the rear bulkhead of the vehicle. Raise the hitch and bumper beam back into position on the studs, center and loosely reinstall the nuts removed in step 5. 7. Torque all 10mm fasteners to 42 lb-ft. 5.
PAGE 4
PAGE 5
SUBARU OUTBACK (EXCLUDING SPORT) 13410 10/3/18 GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 4,000 LBS. TRAILER WEIGHT & 600 LBS. TONGUE WEIGHT. WARNING: *** DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY *** FOR MORE INFORMATION LOG ONTO WWW.CURTMFG.