Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com
Parts List
DESCRIPTIONPART NUMBERQTYITEM
BOLT, CAR,7/16-14 UNC,1-3/4,GRD8,YZ10-1031461
NUT,HEX,7/16-14 UNC,GRD8,YZ
20-0014762
WASHER,S-CON,7/16,YZ30-0016363
.250 x .88 x 2.25" SQUARE HOLE SPACERCM-SP26
4
7/16" FISHWIRE7_16 FISHWIRE
65
2
3
4
1 5
DRIVER SIDE
FRAME RAIL
PASSENGER SIDE
FRAME RAIL
VEHICLE MUFFLER
ACCESS HOLE
(BOTH SIDES)
1. Remove (2) exhaust hangers from the passenger side muffler
and (1) exhaust hanger from the center-front of vehicle for
single exhaust vehicles, dual exhaust will remove (2) hangers
from the driver side muffler as well. Support lowered exhaust
with jack stand.
2. Remove (4) heat shield screws with phillips head screwdriver
or 10mm socket (both sides if equipped with dual exhaust).
Remove four hole plugs from each side of frame to expose
mounting holes. Return all hole plugs to customer.