Installation Guide

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HITCH WEIGHT: LBS.
INSTALL TIME:
MINUTES
INSTALL NOTES:
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
3,500
350
30
30
4,000
400
13511 98-03 TOYOTA SIENNA
8/5/2020
Parts List
ITEM
QTY
PART NUMBER
DESCRIPTION
1 4 10-10271
HHCS,M10x1.25,30,CL10.9,YZ
2 4 30-00186 WASHER,FLAT,3/8,YZ
3 4 30-00184 WASHER,LOCK,7/16,YZ
1) Remove tow hooks if they are present. If tow hooks are not present, remove the 10mm hardware from
the existing weldnuts in the frame.
2) It may be necessary to lower or remove the spare tire.
3) For ease of installation, you may choose to lower the exhaust.
4) Raise the hitch into position and attach with the fasteners provided as shown.
5) Torque all 10mm fasteners to 48 lb-ft.
6) Re-attach the exhaust and return the spare tire to its proper position.
DRIVER SIDE FRAME RAIL
PASSENGER SIDE FRAME RAIL
EXISTING WELDNUTS
(BOTH SIDES)
-NO DRILLING REQUIRED
1
2
3