Installation Guide
Parts List
ITEM
QTY
PART NUMBER
DESCRIPTION
1 4 10-10277
HHCS,M12x1.25,40CL10.9,YZ
2
4
30-00133
WASHER, FLAT, 1/2, YZ
3
4
30-00153
WASHER,LOCK,1/2,YZ
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HITCH WEIGHT: LBS.
INSTALL TIME: MINUTES
INSTALL NOTES:
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
3,500
350
23
40
4,000
400
13517
7/28/2020
-NO DRILLING REQUIRED
1
3
2
1) Raise hitch into position.
2) Insert M12 fasteners as shown through hitch and into existing frame weldnuts.
3) Torque all M12 hardware to 86 lb-ft.
1 UPDATED TO GENERIC TEMPLATE 10/12/2007 KWS
2 FLIPPED WASHER AND LOCK WASHER AROUND 7/21/2008 KWS
3
CHG TO GRADE 8 TORQUE SPECS
7/28/2012
AJP
4 UPDATED HARDWARE DESCRIPTIONS/NUMBERS 7/28/2020 CJW
REVISION HISTORY
REV DESCRIPTION DATE APPROVED
99-05 GEO/CHEVY TRACKER, 99-05 SUZUKI VITARA/GRAND VITARA,
02-06 SUZUKI XL7