Installation Guide

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HITCH WEIGHT: LBS.
INSTALL TIME: MINUTES
INSTALL NOTES:
- NO DRILLING REQUIRED
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
4000 400
30
30
MAZDA CX-9
7/10/2020
13575
Parts List
DESCRIPTIONPART NUMBERQTYITEM
HHCS,M12x1.25,30,CL10.9,YZ
10-1041961
WASHER,S-CON,1/2,YZ
30-0014962
HHCS,M8x1.25,30,CL10.9,YZ10-1044023
WASHER,S-CON,3/8,YZ30-0014824
4
3
DRIVER SIDE
FRAME RAIL
EXISTING WELDNUTS(ALL)
1) Raise hitch into position.
2) Attach, finger tight, with (3) M12 hex bolts and 1/2" conical toothed washers and (1) M8 hex bolt with
a 3/8" conical washer per side.
3) Torque all M12 hardware to 86 ft.-lb. and all M8 hardware to 23 ft.-lb.
2
1
PASSENGER SIDE
FRAME RAIL