Installation Manual

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-800-798-0813
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
10,000 1,000
12,000 1,200
DODGE RAM 1500 WITHOUT OEM HITCH
6/14/2012
14374
60
49
30
HITCH WEIGHT: LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
Parts List
DESCRIPTIONPART NUMBERQTYITEM
.250 x 1.50 x 3.00" SQUARE HOLE SPACERCM-SP4
21
.188 x 1.00 x 3.00" SQUARE HOLE SPACERCM-SP4022
HEX FLANGE NUTHFN 121343
CARRIAGE BOLT1/2-13 x 1 1/244
1/2" x 30" FISHWIRE1_2 x 30 FISHWIRE2
5
-NO DRILLING REQUIRED
-FISHWIRE HARDWARE
-LOWER SPARE TIRE
-REMOVE EXISTING BOLTS
PAGE 1 OF 2
4
2
3
5
1
FOR LONG BEDS
FOR SHORT BEDS
DRIVER SIDE
FRAME RAIL
PASSENGER SIDE
FRAME RAIL
EXISTING BUMPER BEAM
EXISTING WELDNUT
(BOTH SIDES)