Installation Guide
Parts List
DESCRIPTIONPART NUMBERQTYITEM
CARRIAGE BOLT9/16-12 x 1 3/4, GR861
HEX FLANGE NUT9_16-12, GR862
.250 x 1.25 x 2.00" 9/16" SQUARE HOLE SPACERCM-SP7363
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
1-877-287-8634
INSTALLATION STEPS
Curt Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
16,000 2,400
17,000 2,400
1997-2003 FORD F-150 & F-250 LD (NEW BODY STYLE)
12/12/2012
15303
40
59
20
HITCH WEIGHT: LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
1
3
- NO DRILLING REQUIRED
1. Place 9/16" carriage bolts and SP73 spacers through holes in the frame rails
2. Align hitch with carriage bolts and raise hitch into position.
3. Secure hitch to the frame rail using 9/16" flange nuts.
4. Torque all 9/16" fasteners to 150 ft-lbs.
2