Installation Guide

Parts List
DESCRIPTIONPART NUMBERQTYITEM
BOLT,CAR,1/2-13 UNC,1-1/4,GRD8,YZ10-1027841
BOLT,CAR,9/16-12 UNC,1-3/4,GRD8,YZ
10-1032822
HHCS,M14x2,45CL10.9,YZ
10-1044923
NUT,SER-FLANGE,1/2-13 UNC,GRD8,YZ20-0006244
NUT,SER-FLANGE,9/16-12 UNC,GRD8,YZ
20-0010425
WASHER,S-CON,9/16,YZ30-0016426
.313 x 1.50 x 2.00" 9/16" SQUARE HOLE SPACERCM-SP712
7
.250" STRAP PLATE15860-ST28
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
1-800-798-0813
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
20,000 2,700
20,000 2,700
CHEVROLET & GMC 2500/3500
07/24/2020
15860
90
79
45
HITCH WEIGHT: LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
- LOWER SPARE
- DRILLING REQUIRED (SHORT BED)
LEAF SPRING
MOUNTING BRACKET
FRAME CROSS
MEMBER
FRAME CROSS
MEMBER
SHORT BED PASSENGER
SIDE FRAME RAIL
EXISTING FASTENER
SPARE TIRE HEAT SHIELD
EXISTING HOLE
(LONG BED)
LONG BED INSTALLATION
SHORT BED INSTALLATION
LONG BED PASSENGER
SIDE FRAME RAIL
7
2
3
1
4
6
8
EXISTING M14 BUMPER
BRACKET BOLT
DRILL HOLE
(SHORT BED)