Installation Guide

WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY

INSTALLATION INSTRUCTIONS

CHEVROLET / GMC OEM-COMPATIBLE 5TH WHEEL LEGS

Provide this manual, in its entirety, to the end-user

PARTS LIST

Item# Qty Description

1 1 Passenger side leg assembly

2 1 Driver side leg assembly

Provide this manual, in its entirety, to the end-user. Read

and understand instructions before using this product.

Fully instruct and demonstrate the operation of this 5th

wheel hitch to the end user. Include the importance of

observing all warnings contained herein, including warning

labels on 5th wheel hitch mid section. Serious injury or death

may result if the warnings below are not observed.

To avoid serious injury, do not expose hands, body parts

or clothing between the truck and trailer or the truck's bed

sides and trailer. Extreme care should be observed to avoid

serious injury to self, property and observers.

Never exceed the rated towing capacity of the tow vehicle.

Trailer and contents combined must not exceed tow vehicle,

hitch and / or trailer tow ratings. Exceeding rated capacity

may result in separation and / or may result in damage to

5th wheel hitch, towing vehicle, trailer or cause death or

serious injury.

Never position yourself or others under the trailer's kingpin

area (danger zone) during coupling and uncoupling. Improperly

coupled trailers can separate and drop without notice.

WARNINGS

PAGE 1 • 16025-INS-RB • 1.800.798.0813 • NEED ASSISTANCE? • CURTMFG.COM

PAGE 1
INSTALLATION INSTRUCTIONS WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY CHEVROLET / GMC OEM-COMPATIBLE 5TH WHEEL LEGS Provide this manual, in its entirety, to the end-user PARTS LIST WARNINGS Item# Qty Description 1 1 Passenger side leg assembly 2 1 Driver side leg assembly 2 1 Provide this manual, in its entirety, to the end-user. Read and understand instructions before using this product.
PAGE 2
ASSEMBLY Step 1 Prepare the 5th wheel head unit for installation by locating the hardware package containing four M14 hex bolts and flat washers. The 16025 GM OEM legs (#1, #2) are compatible with the following CURT 5th wheel heads: 16520, 16545, 16530, 16515. Step 2 Select a set of mounting holes that will allow sufficient clearance between the 5th wheel trailer and the sides of the tow vehicle.
PAGE 3
T-BOLT ADJUSTMENT Step 1 The locking T-bolts have been pre-installed to ease installation of the 16025. Due to possible variation in the trucks mounting locations, some adjustments may be required. If one or more of the locking handles will not close, begin adjustment by removing the cotter pin securing the castle nut above the handle. See figure 3. Step 2 Loosen the castle nut a quarter-turn while pressing down on the T-bolt. Step 3 Reattempt to close the locking handle.