Owners manual

ManualsBrandsCurt ManualsAutomotiveCURT 16465 Fifth Wheel Custom Bracket Kit Fits 00-06 Tundra

***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***

Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,

Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of

this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or

consequential loss or damage.

16465 TOYOTA TUNDRA (STANDARD CAB LONG BOX)

5/18/07

Parts List

DESCRIPTION

PART NUMBER

QTY

ITEM

.250" DRIVER SIDE PLATECM16465-DS

.250" PASSENGER SIDE PLATECM16465-PS

HEX BOLT

5_8 - 11 x 2 HEX43

HEX FLANGE NUT5/8-11

WASHER WIDE5/8"45

.25 x 2.50 SPACERCM-SP13246

.313" x 1.00 x 2.00" U-SHAPE SPACERCM-SP13610

CARRIAGE BOLT1/2 - 13 x 2"108

HEX FLANGE NUTHFN 1213109

.250 x 1.50 x 2.00" SQUARE HOLE SPACERCM-SP33

1010

FRONT OF TRUCK

REAR OF TRUCK

5TH WHEEL MOUNTING RAILS

(SOLD SEPERATELY)

PASSENGER SIDE

FRAME RAIL

DRIVER SIDE

FRAME RAIL

DRILL APPLICATION : ______

APPROX. INSTALL TIME: ______

OTHER NOTES:

RAISE REAR BODY OF TRUCK

60 MIN.

Summary of content (3 pages)

PAGE 1
6465 TOYOTA TUNDRA (STANDARD CAB LONG BOX) 5/18/07 ***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.*** Parts List ITEM 1 QTY 1 PART NUMBER CM16465-DS DESCRIPTION .250" DRIVER SIDE PLATE 2 DRILL APPLICATION : ______ NO 1 CM16465-PS .250" PASSENGER SIDE PLATE MIN. APPROX. INSTALL TIME: 60 ______ 3 4 5_8 - 11 x 2 HEX HEX BOLT 4 4 5/8-11 HEX FLANGE NUT 5 4 5/8" WASHER WIDE 6 4 CM-SP132 .25 x 2.50 SPACER 7 10 CM-SP136 .313" x 1.00 x 2.
PAGE 2
16465 TOYOTA TUNDRA (STANDARD CAB LONG BOX) 5/18/07 RAIL LOCATION DIAGRAM !IMPORTANT! SYSTEM MAY NOT WORK WITH 2003 AND EARLIER COMPETITOR PRODUCTS TAIL GATE CAB TRUCK FRAME 32.500 in (LONG BOX ONLY) TRUCK FRAME CENTER LINE OF HITCH CENTER LINE OF AXEL SHOWN WITH CURT 16115 5TH WHEEL 2.500 in (LONG BOX ONLY) Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser.
PAGE 3
16465 TOYOTA TUNDRA (STANDARD CAB LONG BOX) 5/18/07 !WARNING! - Do not install mounting rails over plastic bed liners. Plastic liners must be trimmed for metal-to-metal contact. May be installed on spray in liner. - Use only supplied fasteners for installation. - Before installing hitch measure to be sure there will be enough clearance between the truck and trailer to allow for turns. - Frame rail must be clear of any electrical or brake components where side plates attach.