Installation Guide

Step 3
Slide the support arms (#3, #4) onto the main body rack arms (#1), making sure the tightening knob is facing
upward. See Figure 3. Tighten the knobs as shown in Figure 4, Detail F. After the supports are tightened,
insert pan head screw and lock washer (#7) into the end of each arm as shown in Figure 4, Detail G.
Figure 3
Figure 4
Detail F
Detail G
AS SE MBLY
CURTMFG.COM • NEED ASSISTANCE? • 1.800.798.0813 • 18085-INS-RE • PAGE 4