Installation Guide

or
2"
1 1/4"
INSTALLATION
If using a 2" receiver, install your bike rack on your vehicle by sliding the shank into your receiver hitch tube opening
(see Figure 6, Detail J) and secure with the anti-rattle bolt (#10) (Figure 7, Detail L) and clip (#9) (Detail M).
WARNING: Anti-rattle bolt must be threaded completely through the vehicle's receiver tube and tightened to 75 ft. lbs. If not
completely tightened, the bike rack can shake, rattle, rock and vibrate. This could potentially cause damage to the bikes.
If using a 1 1/4" receiver, remove the adapter on the shank of your bike rack (Figure 6, Detail K).
You can now install using the steps above.
Figure 6
Detail KDetail J
CURTMFG.COM • NEED ASSISTANCE? • 1.800.798.0813 • 18085-INS-RE • PAGE 6