Installation Guide

This roof basket and extension is designed to attach to the

CURT 18115 roof basket. Before using the basket, ensure that

the universal brackets are securely attached to the vehicle

cross bars. Periodically check to ensure all knobs and screws

are tight. Remove the basket when not in use.

Step 2

Secure the extension (#1) between the two halves of the

roof basket as shown in figure 3. Attach the side plates (#4)

and secure with the provided machine screws (#2).

Step 3

Secure the roof basket to the vehicle following the

instructions provided with the CURT roof basket.

See figure 4.

ROOF BASKET EXTENSION

WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY

INSTALLATION INSTRUCTIONS

WARNINGS

PARTS LIST

Item# Qty Description

1 1 Basket extension

2 4 Machine screw

3 1 Allen wrench

4 2 Side plate

Figure 1

Step 1

Remove the screws and side plates from the the

CURT roof basket and separate the two halves using

the provided Allen wrench, as shown in figure 2.

AS SEMBLY

Figure 2

Figure 3

Figure 4

PAGE 1 • 18117-INS-RA • 1.800.798.0813 • NEED ASSISTANCE? • CURTMFG.COM