Installation Guide

CURTMFG.COM
•
NEED ASSISTANCE?
•
877.287.8 634
•
45950-INS-RA
•
PAGE 1
Maintenance
Mild automotive detergent may be used to
clean the product. Do not use dish detergent,
abrasive cleaners, abrasive pads, wire
brushes or other similar products that
may damage the finish.
Weight Capacity
Gross trailer weight (GTW) 15,000 lbs.
Tongue weight (TW) 1,500 lbs.
INSTALLATION MANUAL
45950
Tools Required
Socket, 3/4" Torque wrench
Product Photo
Parts List
Item Qty Description
1 1 Adjustable shank*
2 1 Pintle mount
3 2 Pin*
4 2 Clip*
5 4 Hex bolt
6 4 Lock washer
*Sold separately
Level of Difficulty
Easy
WARNING
Never exceed the vehicle manufacturer's recommended towing capacity. The ratings of
the mount system are intended to represent the capability of the product and in no way
reflect the ratings or capacity of the towing system it is being used with. The consumer
or operator are strongly advised to learn the ratings of the various components of the
towing system and never exceed the limits of the lowest rated component being used.
Never hook up trailer safety chains to the mount system. Ensure the safety
chains operate freely around the mount system and do not become entangled.
NOTICE
Before you begin installation, read all instructions thoroughly.
Prior to towing, ensure all fasteners are tight and all structural components are sound.
Using a torque wrench and 1/2" socket, torque hardware to 75 lb-ft.
Product Registration
CURT Group stands behind our products with industry-leading warranties.
Provide feedback and help us to improve our products by registering your purchase at:
warranty.curtgroup.com/surveys